# NUT in Synology

This guide goes trough how to connect and enable NUT Server for UPS with Synology. Assuming that there is connected ups system to synology NAS

##### Synology Setup

1. Login to Synology DSM
2. Go to **Control Panel**
3. Under Hardware & Power go to UPS 
    1. **Enable UPS Support**
    2. Check **Until Low Battery-** as time can vary
    3. **Enable network UPS server**
    4. Under Premitted DiskStation Devices enter IP address of devices that need access to NUT Server

##### Home Assistant Setup

1. Go to Home Assistant
2. Go to Settings
3. Click on Devices & Services
4. Click **Add Integration**
5. Search for NUT Network UPS Tools 
    1. Add IP of Synology NAS
    2. leave rest blank